Stainless steel 1.4301 (V2A). 3 rows with 9, 12 or 15 compartments also to choose from both sides. Version by a rear wall side: it is also suitable for placement stays open. Overall height 600 mm.
Other seating surfaces and sizes available upon request.

Recommendations for use

Cleaning Category
ISO 14644-1: 3
Standard 209E of the U.S. federal standards : 1

Product Benefits

• The functional barrier to delineate different areas
• If desired, you can assign to people using the numbering of the compartments

Technical data

Technical data

Product Benefits

• For storage on demand and in a short space of sheets up to 1500 x 3000 mm format

Technical data

Technical data

Marcos soldiers stand ready for placement They offer maximum resistance to twisting and long-term stability. Support profile C 100. Drilling in place and secure slot for media support.

Comes complete with: 2 frames ready including anchor bolts B 12 – 15/105 for the floor. Minimum quality of concrete B 15.

Total height: height of the support frame 5 mm + motherboard.

About Security
Use only well secured shelves. Please note the detailed instructions and relevant regulations of the employer in accordance with mutual BGR-234.
Compliant to BGR-234, the busy corridors is essential to install bumpers that meet the BGR-234 (see accessories) the posts from the beginning and end of the shelf.
We will gladly inform you.

Technical data

The Max load capacity. a support frame is 4000 kg, with a maximum distance. the lower pair of support brackets to the floor of 1400 mm.

A support frame comprises:
- 2 posts cold steel section thickness 1.5 mm, blue RAL 5010. Profile omega, A x P 50 x 55 mm. Adjustment range 75 mm.
- Sleepers and diagonals of U-profile 15 x 30 x 15 mm, galvanized, bolted to the posts.
- Galvanized base plates 54 x 110 mm, 3 mm thick, bolted. With holes for the floor, Ø 13 mm.

In the media section you will find combinations or shelves full support to match.
In the accessories section you will find the matching accessories such as, for example, strips of steel, chipboard, joints and caps support frames angular.

Support frames are delivered disassembled, with instructions.

Technical data

Mounts and adjusts without screws. Mounting by hooking claws with safety latches that prevent loose support brackets.

Types of support bracket profile:

Good stability of chipboard or steel slats, it is NOT necessary to use angled ceilings.
Tubular profile
To use particle board, to be fixed with 4 corner caps for shelf. Angular caps are not included in the overall supply must be ordered separately, see accessories.
Edge profile tube
Thanks to the edge of 22 mm is particularly suitable for attaching chipboard or steel slats. No need to use angle stops.

In section find the corresponding combinations or shelves full support frames.
In the accessories section you will find the matching accessories such as, for example, strips of steel, chipboard, joints and caps support frames angular.

When you use ribbons of steel or chipboard the max. per shelf can not exceed the max. the pair of support brackets used.

Technical data

Upon request, heights up to 15 m.

Assembly
It is delivered disassembled. Each delivery includes installation instructions and detailed assembly. If desired, we can perform the installation. We will gladly send you an offer.

About Security
Use only well secured shelves. Please note the detailed instructions and relevant regulations of the employer in accordance with mutual BGR-234.
Compliant to BGR-234, the busy corridors is essential to install bumpers that meet the BGR-234 (see accessories) the posts from the beginning and end of the shelf.
We will gladly inform you.

Product Benefits

• The support frame is removable for easy transport and easily adapt to the availability of space in each case can be changed at any time
• All pieces are constructed and manufactured according to the rules and regulations of relevant safety

Technical data

Max loads. instructions must always be understood in relation to the maximum loads of support and area of ​​pallet racking offered above and are valid for a uniform load distribution.
Prices do not include support brackets.

Chipboard, very compact, V20 E1 quality, thickness 38 mm.
Placed on the support bracket. Retention by 4 galvanized brackets (included in price).
Enter the profile of the media in order.

Shelves liquid storage tank, on request.

Product Benefits

• For the storage of objects without pallet

Technical data