The vacuum belt conveyor, in comparison to the solar conveyor belt for a more dynamic acceleration and deceleration ramp and a higher transport speed.
It transports the wafer to the head at a speed of five meters per second. The vacuum conveyor may be traded several wafers simultaneously.

Conventional handling and transport applications require an unproductive trip. The vacuum conveyor belt of Montech has no return and therefore helps to increase productivity in wafer production. Furthermore, it is cheaper. Another advantage compared to other systems is its compact design of the vacuum conveyor belt.

Vacuum conveyor belt SOLTB V
new motor with an integral

The Zentrierband SOLTB-Z  used for the precise alignment of the wafer during transport. The Zentrierband serves to center of 125×125 mm and 156×156 mm wafers. It is used by carriers prior to loading, after unloading from carriers or from measuring and test equipment.

Advantages:
● Easy convertible from 125×125 mm to 156×156 mm
● Careful centering
● construction of the solar conveyor belt SOLTB (wafer break is not on Zentrierband)
● Includes drive components
- Neugart PLE-40-gear (gear shaft Ø10 h7);
- Maxon GP 32 A-Gear (gear shaft Ø 6);
- Maxon GP 32 HP gearbox (gear shaft Ø10)

Zentrierband SOLTB-Z

The Swivel belt SOLTB-S, Defective products in the line can discharge without delay production. With the swivel belt SOLTB 12 ° S-defective products can be discharged in the line. By the actuator, the centrally placed swivel belt no protruding edges and can be mounted to save space.

Advantages:
● Space-saving thanks to the center drive
● Small size
● Includes drive components
- Neugart PLE-40-gear (gear shaft Ø10 h7);
- Maxon GP 32 A-Gear (gear shaft Ø 6);
- Maxon GP 32 HP gearbox (gear shaft Ø10)

Swivel belt SOLTB S-12 °
(The automatic exclusion of faulty products)

The Ausschleusemodul SOLTB-ASM can wafers and cells due to its vertical motion put by 90 degrees. Ausschleusemodule SOLTB-ASM 104×144 are pneumatically driven modules, which as a single discharge, or combined in various configurations as a multiple-discharge, can be used. It is used together with a solar conveyor belt SOLTB-G-144 as a conveyor belt and a solar-belt SOLTB-G-104 as Ausschleuseband, or at multiple ejection of several solar-conveyors SOLTB-G-104 as Ausschleusebänder.

The belt drive is via a special link from the solar conveyor belt SOLTB-G-104.

Advantages:
● Do not touch the product
● length and width according to the customer
● belt drive is via a special coupling

Ausschleusemodul SOLTB-ASM-104×144

The Discharge conveyor SOLTB-E for loading and unloading of carriers is a double belt conveyor, which consists of one fixed and one retractable member having a stroke of 160 mm.

The unloading conveyor belt SOLTB-E is a double belt conveyor, which consists of one fixed and one retractable member having a stroke of 160 mm. The extending portion is operated by a pneumatic cylinder.
The discharge conveyor has only one pair of straps, and only one drive, making it a cost-effective and efficient product.

Advantages:
● extended part 9.6 mm thick.
● Head drive on the right or left
● Includes drive components
Neugart PLE-40-gear (gear shaft Ø10 h7);
Maxon GP 32 A-Gear (gear shaft Ø 6);
Maxon GP 32 HP gearbox (gear shaft Ø10)
● Diameter of the drive roller 30 mm

The solar-SOLTB conveyor belts are used as additions and Wegfuhrbander to linking of entire production lines and are available with belt or in a special design with timing belt. The solar conveyor belt consists of a chassis with two belts, the synchronous operation is guaranteed. The complete volume can from the top and are removed and the Gurtaustausch is possible in the installed position.
The solar conveyor has no protruding protruding edges. It conveys the delicate wafers with high precision and utmost care. The replacement part cost is low, since the solar conveyor belt consists of only a few parts. Wafer breakage can escape any good, there’s enough space between the belts.

Advantages:
● length and width according to the customer (standard width of 104 and 144 mm)
● With flat belts or a special design with belt available
● Easy belt change even when mounted
● Head drive on the right or left
● Includes drive components
Neugart PLE-40-gear (gear shaft Ø10 h7);
Maxon GP 32 A-Gear (gear shafts Ø6 -0004 -0015);
Maxon GP 32 HP gearbox (gear shaft Ø10 -0005 +0014)
● Roll diameter 30 mm

The big belts are available with top, middle and drum motor drive. The drive of this conveyor belt via a spur gear motor 230/400 V with large power reserves. In the variant with a purely mechanical center drive, automatic Gurtspannvorrichtung ensures that the belt is only as strong as necessary and not stretched to the maximum load.

Description Large belts of GTB Montech come as individual to individual and Wegführbänder in manufacturing plants or the concatenation of entire transport systems are used. The modular design it can easily be adapted to specific customer requirements.
The drive of this conveyor belt via a spur gear motor 230/400 V with large power reserves. Thus can be transported in conveying mode kg to 125. The following chassis widths of this belt are available. 200, 300, 400, 500, 600, 700 and 800 mm
at head drive, the drive unit can be mounted depending on the space below or above the conveyor belt. In the variant with overhead power transmission products can be transported to a height of 80 mm. The possible band length is between 1 and 6 m.

The variation provides center-drive at up to 15 m long conveyor belts to. . The drive unit can be moved following versions of this belt are available: